Owner’s Manual for 10 Ton Kinetic Splitter
7
General Information and Setup
Assembling Unit
1.
See
Figure 2-2
. Use a 14 mm wrench to remove
the two nuts and lock washers (A) that hold frame
stand (B) onto frame (C).
.
A
B
010948
C
Figure 2-2. Assembling the Unit (1 of 2)
2.
Remove the frame stand and rotate it 180°.
3.
See
. Reinstall frame stand with handle
(D) on the outside using the nuts and lock washers
removed in step 1.
D
010949
Figure 2-3. Assembling the Unit (2 of 2)
