Generac Portable Products 1440-0 Owner'S Manual Download Page 2

Generac Portable Products 2,400 PSI High Pressure Washer

2

EQUIPMENT

DESCRIPTION

CONGRATULATIONS on your purchase of a
GENERAC high pressure washer. It has been designed,
engineered and manufactured to give you the best possible
dependability and performance.

This manual contains information for a high pressure
washer that operates at 2,400 PSI at a flow rate of
2.2 gallons per minute. This high quality residential system
features large 10” wheels, brass pump head construction,
axial cam pump with stainless steel pistons, automatic cool
down system, chemical injection system, adjustable spray
nozzle. Includes safety goggles, heavy duty 25’ hose, and
more.

Please read and retain this manual. The instructions will
enable you to assemble your unit without tools, and
maintain your high pressure washer properly.

Every effort has been made to ensure that the information
in this manual is both accurate and current. However,
Generac reserves the right to change, alter or otherwise
improve the product and its documentation at any time
without prior notice.

Should you experience any problem you cannot easily
remedy, call the pressure washer helpline at
1-800-270-1408.

CUSTOMER

RESPONSIBILITIES

• Read and observe the safety rules.

• Follow regular schedule in maintaining, caring for and

using your high pressure washer.

• For off-season storage, review “Preparing the Unit for

Storage” on page 14.

SAFETY RULES

CAUTION!

When setting up, transporting,

adjusting or making repairs to your high pressure
washer, always disconnect the spark plug wire from
the spark plug and place the wire where it cannot
contact spark plug.

DANGER!

Engine exhaust gases contain DEADLY

carbon monoxide gas. This dangerous gas, if
breathed in sufficient concentrations, can cause
unconsciousness or even death. Operate this
equipment only in the open air where adequate
ventilation is available.

DANGER!

Gasoline is highly FLAMMABLE and its

vapors are EXPLOSIVE. Do Not permit smoking,
open flames, sparks or heat in the vicinity while
handling gasoline. Avoid spilling gasoline on a hot
engine. Allow unit to cool for 2 minutes before
refueling. Comply with all laws regulating storage
and handling of gasoline.

Read this manual carefully and become familiar
with your pressure washer. Know its applications,
its limitations, and any hazards involved.

• Locate this pressure washer in areas away from

combustible materials, combustible fumes or dust.

• The high pressure equipment is designed to be used with

Generac authorized parts only. If you use this equipment
with parts that do not comply with minimum
specifications, the user assumes all risks and liabilities.

• Some chemicals or detergents may be harmful if inhaled

or ingested, causing severe nausea, fainting or poisoning.
The harmful elements may cause property damage or
severe injury.

• Do Not allow CHILDREN to operate the pressure

washer at any time.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects, or other reproductive harm.

WARNING:

Summary of Contents for 1440-0





















Reviews: