Generac Portable Products 1421-1, Owner'S Manual

Page: 5 / 24

Generac Portable Products 4,000 PSI High Pressure Washer
5
WARNING!
Read entire owner’s manual
before you attempt to assemble or operate your
new pressure washer.
REMOVE PRESSURE
WASHER FROM CARTON
• Remove the handle and parts box included with
pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
• Main Unit
• High Pressure Hose
•
Handle Assembly
• Pump Oil Dipstick (hanging on pump)
• Accessory Box (includes the following):
•
O–Ring maintenance kit
• Nozzle cleaning kit
• Bag containing 5 multi–colored quick connect
nozzles
• Handle hardware, including 4 carriage bolts
and 4 flange nuts
• (2) Bottles of engine oil
• Spray Gun with quick connect fitting
• Safety Goggles
• Nozzle extension with quick connect fitting
• Owner’s manual
• Engine manual
If any of the above parts are missing or damaged, call
the pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,
call the pressure washer helpline at 1–800–270–1408.
To prepare your pressure washer for operation you will
need to perform these tasks:
• Attach the handle to the main unit.
• Remove shipping cap from the pump and install oil
dipstick.
• Add oil to the engine.
• Add fuel to the fuel tank.
• Connect the high pressure hose to the spray gun
and the pump.
• Connect the water supply to the pump.
• Connect nozzle extension to spray gun.
• Select and install desired nozzle.
Attach Handle to the Pressure
Washer
Use either a 13mm wrench or adjustable wrench to
attach the handle to the pressure washer.
To attach handle to the pressure washer :
• Slowly tip the pressure washer forward and let it
gently rest on the front bumper (Figure 1).
Figure 1 — Attach Handle to Pressure Washer