Generac Portable Products 1330-0, Owner'S Manual

Page: 6 / 24

6
Generac Portable Products 2000PSI High Pressure Washer
WARNING
! Read entire owner’s manual
before you attempt to assemble or operate
your new pressure washer.
REMOVE PRESSURE
WASHER FROM CARTON
• Remove the high pressure hose and parts box
included with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
• Main Unit
• High Pressure Hose
• Parts Box (includes the following):
• Oil Bottle
• Wire Form
• Goggles
• Nozzle Cleaning Kit
• O–Ring Maintenance Kit
• Owner’s Manual
• Engine Manual
• Engine Warranty
• Emissions Control Warranty
• Warranty Card
• Spray Gun
• Adjustable Nozzle Extension
If any of the above parts are missing or damaged, call
the pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,
call the Pressure Washer Helpline at
1–800–270–1408.
To prepare your pressure washer for operation
you will need to perform these tasks:
• Unfold the handle and attach the wire form.
• Add oil to the engine.
• Add fuel to the fuel tank.
• Connect the high pressure hose to the spray gun
and the pump.
• Connect the water supply to the pump.
• Connect nozzle extension to gun.
Secure Handle and Wire Form
• Lift handle and slide locking caps over the bottom
part of the handle (Figure 1).
• Insert wire form into the handle with the longer arm
positioned on the left. From rear of unit, the hook
should resemble a “J” (Figure 2).
Figure 1 — Secure Handle
Figure 2 — Attach Wire Form to Handle
Lift handle
and slide
locking caps
into place