Generac Mobile MLG15, Owner'S Manual

Page: 18 / 36

14 Owner’s Manual for Mobile Generator
General Information
Unit and Serial Number Locations
See Figure 2-5 to locate the unit ID tag (A) and Vehicle
Identification Number (VIN) tag (B). Important
information, such as the unit model number, serial
number, VIN and tire loading information is found on
these tags. Record the information from these tags so it
is available if the tags are lost or damaged. When
ordering parts or requesting assistance, you may be
asked to provide this information.
Figure 2-5. Unit and Serial Number Locations
Engine Oil Recommendations
To maintain the product warranty, the engine oil should
be serviced in accordance with the recommendations of
this manual.
The engine has been filled with factory engine oil of a
grade recommended by the engine supplier.
Use a high quality detergent oil with an appropriate
classification and viscosity for the engine type and
ambient temperature conditions. Consult your GMASD or
the applicable engine service manual for engine oil
recommendations.
Coolant Recommendation
Consult your GMASD or the applicable engine service
manual for engine coolant recommendations. See table
below for mixtures:
* Maximum freeze protection is at 70%.
B
A
010052
Freezing Point °F (°C)
-12
(-24)
-34
(-36)
-54
(-48)
-90
(-67)
Water: % Volume 60 50 40 30
Anitfreeze:% Volume 40 50 60 70*
(000149)
DANGER
Risk of poisoning. Do not use mouth to siphon
coolant. Doing so will result in death or serious
injury.
(000154)
WARNING
Risk of burns. Do not open coolant system
until engine has completely cooled. Doing so
could result in serious injury.
(000165a)
CAUTION
Risk of overheating. Do not use any chromate base
rust inhibitor with propylene glycol base antifreeze,
boosters, or additives. Doing so will cause overheating
and possible equipment damage.