Generac Mobile CTF10, Owner'S Manual

Page: 16 / 32

12 Owner’s Manual for CTF10 Light Tower
General Information
Control Panel
F
D
H
A
010129
B
G
C
E
K
I
J
Figure 2-4. Control Panel
Control Panel Features and Functions
(A)
Input power selector switch
Selects the shore power source.
• Choose the 15 A setting if the unit will be operated
as a stand-alone light source.
• Choose the 20 A setting if auxiliary equipment or a
second CTF10 will be connected to the unit.
(B) Off/Manual/Timer/Light Sensor Selector
Selectable modes are:
•
0
: Manual OFF.
•
:
Manual ON.
•
:
Timer ON. See Timer for more information.
•
:
Light Sensor ON. See Light Sensor for
more information.
(C) 2 A AC Fuse
Axillary circuit.
(D) Main circuit breaker
Resettable main circuit breaker for the LED lights and
120V/20A GFCI receptacle.
(E) Mast circuit breakers
Individual circuit breakers for the LED light fixtures.
(F) Light sensor intensity setting
Sets light sensor lux threshold. Used when Off/Manual/
Timer/Light Sensor selector is set to Light Sensor. See
Light Sensor for more information.
(G) Digital timer
Sets timer schedule. Used when Off/Manual/Timer/Light
Sensor selector is set to Timer. See
Timer for more
information.
(H) Electrical ground connection
Electrical grounding stud for connecting an earth ground
to the unit if required.
(I) 120VAC-15A plug (shore power input)
Connection point for 120V-15A input power. Requires a
NEMA 5- 15P connection.
(J) 120VAC-20A plug (shore power input)
Connection point for 120VAC-20A shore power input.
Requires a NEMA L5-20P connection.
(K) 120VAC/20A GFCI convenience receptacle (5-20R)
Customer convenience receptacle for auxiliary
equipment. Includes a Ground Fault Circuit Interrupter
(GFCI) test and reset button. Requires a NEMA 5-20P or
5-15P connection.