Manager™ (GLM™) network. Do not
connect to Ethernet LAN.
“Loudspeaker Connectors” Group
These connectors are used for connecting
the rack mounted RAM-L amplifier to the
monitor enclosure.
1. “LED” Connector
This RJ45 socket is a connection for
the front panel warning LED.
2. “Woofer” Connector
A standard four-pole Speakon cable
connects to the woofer.
3. Midrange/Tweeter” Connector
A standard four-pole Speakon cable
connects to the the midrange and
tweeter.
Connecting Cables
Insert the connectors into the appropriate
sockets “WOOFER”, “MIDRANGE/
TWEETER” and “LED CONNECTOR” found
on the rear panel of the amplifier unit and the
rear of the monitor. Note that each RAM-L
amplifier is individually calibrated for use with
the monitor enclosure that it is delivered with
and marked with the same serial number. Do
not mix these amplifier/monitor pairs.
Figure 3. GLM network cabling
Figure 1. The location of the acoustic axis.
L
R
C
30
0
RS
LS
100 120
0 -
0
Figure 2. Recommended placement
and alignment of monitors in a 5-chan-
nel system (ITU-R BS.775-1)
Figure 4. Connector panel of the RAM-L amplifier.
LED CONNECTOR
CONNECT ONLY TO GENELEC NETWORK.
ANALOG
IN
DIGITAL IN
AES/EBU
DIGITAL THRU
AES/EBU
MAINS INPUT
50 / 60 Hz 750 W
100 - 230 V~
SERIAL NUMBER
MIDRANGE /
TWEETER
WOOFER
LOUDSPEAKER CONNECTORS
RAM-L AMPLIFIER
MODULE
www.genelec.com
MADE IN FINLAND
CONTROL NETWORK
2
1 3
THRU
IN
1
1
2 3
3
2
-
GND
+
DIRECT
LOUDSPEAKER
CONNECTOR
CONSULT OPERATING
MANUAL BEFORE
OPENING !
ANALOG
AUDIO
INPUT
DIGITAL
AUDIO
INPUT
DIGITAL
THRU
CONNECTOR
CONTROL
NETWORK
CONNECTORS
LOUDSPEAKER CONNECTOR GROUP
MAINS
CONNECTOR
Cable gauge
Max. length
2.0 mm
2
(14 AWG)
30 m (100 ft)
3.3 mm
2
(12 AWG)
40 m (130 ft)
5.3 mm
2
(10 AWG)
60 m (200 ft)
Table 1. Recommended cable thicknesses
for different lengths of signal cable
LISTENING
POSITION
MICROPHONE
GLM
NETWORK
GLM
NETWORK
GLM
NETWORK
USB
RAM-L
RAM-L
RAM-L
a
272 mm
10 3/4 in
196 mm
7 3/4 in
a
235 mm
9 1/4 in
456 mm
17 15/16 in
