8010-320 Table Stand for GENELEC 6010A
Instructions
The table stand is ready for set up.
Four bumpons keeps the monitor free from gliding
and vibrating.
Furthermore it safes the desk from scratches.
MONITOR MOUNTING
- Set up table desk
1
.
- Lead cords
2
through the hole and
-
connect them with the monitor
3
.
- Bolt together the monitor with the stand.
-
Use both half-round-head-screws
4
M6 x 12 mm.
Safety instructions
- only for GENELEC 6010A
- Inspect bolted assemblies regularly.
- For use only on even surfaces.
TILTING
- The monitor plate
5
can be tilted about 20° backwards.
- Hold the monitor, loosen the wing bolt
6
a little and
-
tilt the monitor into desired position.
-
Then tighten the wing bolt again.
M8x12, with Nylon Patch (4x)
3.a
Attach the tube
onto the ceiling
anchor bolt
GENELEC
Oy
Olvitie 5, Fin-74100 Iisalmi, www.genelec.com
23270-000-55/63/68 Rev.02 03-80-408-00 5/10
