15
button to delete the selected image. Press EXIT to exit the 4 x 4 image display
mode.
INSTALLING VISUALIZER SOFTWARE
This function is to snap and display images with the USB interface, which
includes displaying static and dynamic pictures, snapping dynamic images and
playback the dynamic images with the Windows Media Player or its own
player.
A. Insert the CD-ROM that comes with the visualizer into the CD-ROM drive.
If Autorun is enabled on your system, then the Software Setup window will
be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, Click [Start]
-> [My Computer], and double click
(the CD-ROM drive letter might
be different in different computer systems), and then the above screen will
appear immediately.
B. Click the
Install Capture Program
button to install the program that
captures images in the AVI or
JPG
format.
C.
Click the
Install Code-Writing Program
button to install Code-Writing
Program.
D. After the installation is finished, then click the
Exit
button to exit the
Software Setup window.
E. Shut down your computer when prompted in order for the changes to take
effect.
F. Use the USB2.0 cable provided to connect your computer to the visualizer
before your computer is restarted.
USB PORT
The USB port can be used to store still images from the visualizer in a
16
computer. Connect the visualizer to your computer with the supplied USB
cable. The visualizer software is available on the supplied CD-ROM.
* Please pay attention to the following:
1. Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above,
Graphic card 64M, USB 2.0 port, Hard disk 40G or more, Monitor display
resolution higher than XGA (1024*768).
2. Operating system: Windows XP SP2 (Service Pack 2).
3. Must use a high-speed USB 2.0 cable provided
4. When connecting the visualizer to a desktop computer with the high-speed
USB 2.0 cable provided, we recommend using the USB port located on the
rear of the mainframe. The USB port on the front of the computer might
have interference.
USB IMAGE CAPTURE
You can capture and control images on the visualizer from a computer
connected with a USB connector.
Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx” (x.xx is software’s
version) to open the software.
A. Static Images Snap
Click “Capture”—>“Capture Frame”, input the file name in dialog box, or you
can click
icon on the toolbar, and then input file name in dialog window.
The image file is JPG format.
B. Snap Video Stream
Click “Capture”—> “Start Capture”, input the file name in dialog box, or click
icon on the toolbar, then input the file name in dialog box. If you want to set
the time limit for the capture, select “Capture” ->“Set Time Limit” to set the time
limit. Click “Start Capture” to start capture, and click “Stop Capture” or
icon
on the toolbar to stop capture. (If you have set the time limit, it will stop