Alert 150-AC
Hardware Installation and User Guide
9000-0000-128 Revision 00
2 of 23
Genave Electronics
Important Safety Information
Installation & Service Precautions
Electrocution, severe personal injury and damage to equipment can
occur during installation or servicing this equipment. All electrical work should be
performed by, or under the supervision of an experienced electrician and in
accordance with all applicable electrical, fire, building and safety codes.
This equipment can start at any time from local controls, automatic
timers, radio remote, commands from a computer and many other
sources. Attached equipment can cause personal injury when they engage. Whenever
working in or around the equipment you must assume it could activate at any moment,
and take appropriate precautions to protect yourself and others. You should
completely disable the equipment before working on or in close proximity to any part
of it.
You must test the system and equipment to insure it is operating correctly after the
installation, as well as after any work has been performed.
System Operation
Training is necessary to ensure those responsible can correctly control the system. It
is also necessary that everyone understand the purpose of the equipment and the
protective actions they need to take when the system is activated.
You must carefully read and completely understand all the information about the
system including its abilities and its limitations.
Warning
If incorrectly used, this equipment can cause severe injury. Those who
use and maintain the equipment should be trained in its proper use,
warned of its dangers, and should read the manuals before attempting
to set up, operate, adjust or service the equipment. Keep this manual
for future reference.
