background image

14

SSL-836  8 × 36 in. Soft Strip Daylight LED - USER MANUAL

DISCL

AIMER

This device complies with part 15 of the FCC rules. 
Operation is subject to the following two conditions:

1.  This device may not cause harmful interference.

2.  This device must accept any interference received, 

including interference that may cause undesired 
operation. 

Note: This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that 
interference will not occur in a particular installation. 
If this equipment does cause harmful interference to 
radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the 
following measures:

FCC DISCLAIMER

 

·

Reorient or relocate the receiving antenna.

 

·

Increase the separation between the equipment 
and receiver.

 

·

Connect the equipment to an outlet on a circuit 
different from that to which the receiver is 
connected.

 

·

Consult the dealer or an experienced radio/TV 
technician for help.

Important: Changes or modifications to this product 
not authorized by Gradus Group could void the 
electromagnetic compatibility (EMC) and wireless 
compliance and negate your authority to operate 
the product. This product has demonstrated EMC 
compliance under conditions that included the use 
of compliant peripheral devices and shielded cables 
between system components. It is important that you 
use compliant peripheral devices and shielded cables 
between system components to reduce the possibility 
of causing interference to radios, televisions, and other 
electronic devices.

Summary of Contents for SSL-836

















Reviews: