SSL-50 50 in. Soft Strip LED - USER MANUAL
7
MOUNTING THE SSL-50
TO A LIGHT STAND
1. Make sure the ratchet handle is
tightened before mounting the SSL-50.
2. Loosen the locking knob, and place
the 5/8-inch receiver on a light stand.
3. Tighten the locking knob until secure.
4. Loosen the ratchet handle to adjust the
light’s tilt and swivel. Once the light is
aimed, retighten the ratchet handle,
and make sure the fixture is secure.
POWERING
THE SSL-50
USING THE SSL-50 WITH AC POWER
Important
The SSL-50 is a multivoltage fixture capable
of running on 100 to 240 V, 50/60 Hz. The
included cable has a 120 V, 60 Hz plug. To
use this fixture with other voltages, you
must use a plug adapter (sold separately).
1. Connect the AC power adapter to
the control box with the 4-pin XLR
cable, and then use the power
cable to plug it into an outlet.
ins
tr
uctions
3
4
1