SHENZHEN Gemvary TECHNOLOGY CO.,LTD
http://www.gemvary.com
ADD:6th F, Bld 1, Honghualing West Industrial Area, Zhuguang North Rd, Nanshan District, Shenzhen
518055, China
TEL:+86-0755-86320888 FAX: +86-0755-81466627
第
6
页
Buttons and interfaces description
：
A. Power Switch
：
On or Off
（
Long press 3 seconds
），
If you turn on the Standby Function
（
Setting refer to the Setup Function Description
）
,If Standby
（
Press the power key to switch to
a state
）
B. Volume
：
Press the lower left corner, can be increased sound, press the lower right corner,
the sound can be reduced
C. Power Indicator
D. B Jack
：
Peripheral connection interface
E. F Jack
：
T-flash memory card can be inserted
F. Mini 5pUSB Jack
：
Upgrade the system connector
G. HDMI:HDMI(High-Definition Multimedia ) output interface
J. External power adapter socket (alternate port)
K. The main role of the base stand: the indoor unit into the bracket,then 6P Socket and
Jack seat docking, power and network cable should be connected to the bracket on the power
supply to the indoor unit for charging and communication through the stent, the stent can be
equipped with RF wireless module, fixed, the bracket on the wall, the indoor unit freely taken
down to be used alone.
1.2 Interface Introduction
RJ45 Port
Power port
PA hole
The figure below shows :
10
＇
＇
Indoor unit base
