Installation
Please follow the steps below to install the device:
1.
Plug in mini-hub to wall outlet or USB supply.
2.
Device will flash green 1 blink per second indicating it is not configured.
3.
Press and hold the setup button for 10 seconds until the LED changes to flashing
orange.
a.
This will cause the mini-hub to enter CONGURATION mode and create a
wifi-access point with the SSID MiniHub-xxxxxx where the last digits are
the last 6 digits of the MAC address.
4.
Connect a device to the MiniHub-xxxxxx AP.
a.
The unique password for the configuration AP is found on the label.
5.
Open a Web browser and type the address 192.168.4.1 into the address bar.
a.
A selection of WiFi APs found from site survey is shown.
6.
Find the desired AP and click the + next to the name.
7.
Enter the password for the AP in the dialog box and hit OK.
8.
Scroll to the bottom of the page and click “Save and Reboot” and affirm in the
dialog.
9.
The Mini-Hub will reboot and the LED will flash Green then Green/Orange then
will stay solid Green when it is connected to the server.
10.
Once it is solid green setup is complete.
