10
4.2. Installation Procedure
Please follow the following steps one by one in order to install successfully.
The PRISM WLAN Configuration Utility is installed simultaneously with the driver by executing the
PRISM for Windows.exe file. Installation procedures differ depending on whether this is an initial
installation or an upgrade. The following sections discuss these scenarios.
Note also that some versions of Microsoft Windows operating systems require administrator privileges
to install software. If this is the case for your operating system, be sure that you have such privileges
before executing the PRISM for Windows.exe file.
To upgrade an existing driver, it is not necessary to remove your PRISM card from your computer.
Simply run the PRISM for Windows.exe file to replace the existing driver with the latest version. After
the new driver is installed, you must restart the operating system (if the system was not restarted
during the installation procedure).
1. Insert the given
Installation CD
in the
CD-ROM.
2. Select CD-ROM drives to locate driver files.
3. Find
the software
in the
CD-ROM
and run the
program “ PRISM for Windows.exe file ”
in order
to set up configuration utility & driver.
Follow the instruction and click
Continue
.
Note: Do not insert the
WLAN
USB adapter until you are asked to do so, failure of which may result in unsuccessful
installation of your
11Mbps Wireless LAN Mini USB Adapter
