GemOro Superior Instruments
4
COMPLETE OPERATING INSTRUCTIONS
–
Steps 1 through 12
(WARNING: DO NOT PLUG IN OR TURN ON UNTIL YOU REACH
STEP 5).
1. Place the Brilliant Spa upright on a flat, dry, level surface near the
edge of a sink or counter.
2. Be certain the stainless steel mesh basket is installed into the
slot located under the steam nozzle. Insert the basket firmly,
while being sure to press hard enough to be certain it is installed
securely and completely.
3. With the steamer being sufficiently cool, carefully unscrew the
fill cap until it is removed, insert the funnel and while using the
water fill cup, pour 5 oz. of undiluted tap water into the tank twice,
making a total of 10 oz. Never guess at the water level as you
might overfill the tank beyond 10 oz. capacity. Always use the
supplied water fill cup.
4. Replace the water fill cap by hand tightening. Do not over-tighten.
Over-tightening could result in damage to your fill cap gasket and
consequently your steamer will not pressurize properly.
5. Plug in the Brilliant Spa to a grounded electrical outlet that has a
power rating sufficient to operate the product. Locate the switch
on the power cord and flip it to the “I” position to turn it on. Within
approximately 3 minutes it will automatically heat up the water in
its tank creating pressurized steam. The red LED light will indicate
that the steamer is heating up the water in its tank and building
pressure.
6. When the green LED lights up that indicates that it is ready to be
used. Please note that the green LED light will cycle on and off as
the steamers thermostat automatically heats up while maintaining
constant pressure.
7. Using the stainless steel jewelry holding tweezers, firmly yet
carefully grasp the item being cleaned and hold it approximately
one inch beneath the steam nozzle located above the mesh basket
or simply place the item being cleaned in the mesh basket. Please
note that the mesh basket may be removed for an unrestricted
cleaning zone when cleaning larger items.