GEM
ORO
SUPERIOR INSTRUMENTS
4
WATER/SOLUTION MIXTURE USED IN ULTRASONIC TANK
To achieve the best cleaning results from your ultrasonic, the
proper cleaning solution must be added to the water in the tank.
Choose from the selection of specially formulated
GEM
ORO
cleaning solutions for the ultimate cleaning experience.
WARNING:
NEVER use flammable, acidic or ammonia-based
solutions in your ultrasonic.
CLEAN JEWELRY & MORE
Submerge the included basket containing your jewelry or
other items you wish to clean in the tank. Never place jewelry
or anything being cleaned directly on the bottom of the tank,
because it will cause pitting on the tank and damage the
transducer, while voiding the warranty. Not all items including
every type of jewelry or gemstones are suitable to be cleaned
in an ultrasonic. Consult an expert to confirm if the item may be
cleaned in an ultrasonic prior to cleaning.
IMPORTANT:
BE CERTAIN TO ADD WATER AS IT EVAPORATES
FROM THE TANK, WHILE NOT ALLOWING THE WATER LEVEL
TO FALL BELOW THE MAX FILL MARK ON THE REAR OF THE
TANK WALL.
DEGASSING PERIOD FOR SOLUTION
Water that has not been “degassed” will cause the cavitation
(action) of the ultrasonic to appear very slow or flat. Depending
on the type of solution you are mixing with water in your
ultrasonic, the degassing time may vary from less than 5 minutes
to as much as 15 minutes depending upon factors such as
temperature and soap content. Degassing is the natural process
of removing gasses from any tank solution being affected by
ultrasonic sound waves. Degassing occurs whenever you first turn
Summary of Contents for 1.2 QT
Page 1: ...1 2QT ULTRASONIC CLEANER ...