Relays power 86
Power GND
Red - +12V
X1
Black - Ground
1 = Enable - Connect to Bat +
2 = Bat+
3 = Bat-
4 = Out-(Common with Bat -)
5 = Out +12V
P12W180
1
2 3
4
5
24
13
DC/DC converter
Fuse holder
3A fuse
Always power the installation using
a permanent power supply.
Do not install behind the ignition key
switch, emergency button or any
other supply that might cut of power.
The LED indicates if 12V output is available.
If this led is off, please verify the installation
Make sure to connect pin #1 which
enables the DC/DC converter.
This DC/DC converter is a non
isolated converter. Grounds on pin
#3 and #4 are common.
The complete Sapphire v3
installation, including all accessories
operates on 12V DC.
If the machine has a battery voltage
of 15V or more (eg. 24V, 36V, 48V, ..),
the included DC/DC converter
MUST be used.
