GEMO
ERROR MESSAGE
“FAiL”: Displays “FAiL” message in case of sensor failure, measurement out of range or
hardware fails to measure input signal.
OUT CONTROL FORM; ON-OFF
OUT relay is OFF when process value (PV) is greater then or equal to SET value. OUT relay is
ON when PV is less then or equal to (SET-Hys) value (Hys has a fixed value of 3
o
C).
CLAEANING
Do not use any solvents (alcohol, thinners, benzine, acid, etc.) or corrosive substances to clean
the device. Use only a dry and clean non-abrasive cloth. Before cleaning, disconnect the power
supply and mains connections.
Gürbüzo
ğ
lu Elektronik San. ve Tic. Ltd.
Ş
ti.
http://www.gemo.com.tr
Çamlıtepe Cad. No:297 / 3-4 Siteler, Ankara, Türkiye
e-posta: [email protected]
Tel: +90-312-3503900, Fax: +90-312-3511117
4