2
7. Insert the tether stakes into
the ground and attach the
tethers(See illustration 4).
8.
To deflate, unplug fan.
For faster deflation, unzip
zipper after unplugging fan.
Do not unplug by pulling on
cord.
USER SERVICING INSTRUCTIONS
Lamp Replacement
Disconnect the plug from the electrical outlet and allow the lamp
to cool completely before replacing bulb. Do not touch the bulb
when the power is "ON" as it is extremely hot and make cause
electrocution.
1. Grasp plug and remove from receptacle or other outlet device.
Do not unplug by pulling on the cord.
2. Open the zipper opening on the Airblown
®
Inflatable.
3. Open the protective light cover carefully by pressing down on
the two locking side tabs simultaneously.
4. Replace lamp with same type 7W maximum, candelabra
base, UL classified.
5. Do not over-tighten the lamp as this may damage the lamp or
lamp holder.
Replace only with same type C7, 7 Watt Max Candelabra-base
120 Volt UL Classified lamps.
CAUTION
Fuse Replacement
WARNING:
Risk of Fire:
Replace only with same size
and type of fuse.
WARNING:
Risk of Fire:
Do not replace the
attachment plug. Contains a safety
device (fuse) that should not be removed.
Discard product if attachment plug is
damaged.
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on the cord.
2. Open fuse cover. Slide open the fuse access cover on top of
the attachment plug towards blades. (See illustration)
3. Remove fuse carefully.
4. Replace fuse only with 5 Amp Max, 125 Volt (provided with
product).
5. Close the fuse cover. Slide closed the fuse access cover on
top of the attachment plug.
CAUTION
To reduce the risk of fire do not deliberately reposition either
lamp holder contact.
Do not attempt to inflate your Airblown
®
Inflatable during unusually
strong winds. If it becomes too windy for safe operation, simply
allow your Airblown
®
Inflatable to deflate and wait for better
conditions before re-inflating.
Protect the electric fan and power cord from direct exposure to
water. This precaution will reduce the risk of electrical shock.
When the temperature is below 14° F (-10° C), the motor may
temporarily stop running. The motor will begin functioning again
higher temperatures.
WARNING
Remove all plastic fasteners and tags. These are part of the
packaging and should be discarded.
This item is not a toy and should be used for decorative purposes
only.
For indoor and outdoor use.
120 V 60 Hz.
TROUBLE SHOOTING CHECKLIST
If your Airblown
®
Inflatable is not inflating, the problem may be.
1. The power source is disabled or the cord may be unplugged.
2. Debris may be lodged in the motor.
3. The zipper may not be securely fastened, sealing the Airblown
®
Inflatable.
4. The temperature may be below 14° F (-10° C).
NOTE:
ONCE FAN IS UNPLUGGED AND STOPS BLOWING,
YOUR Airblown
®
Inflatable WILL DEFLATE.
FREQUENTLY ASKED QUESTIONS
(FAQ’s)
1. Can I continually run my Airblown
®
Inflatable?
Yes, you can run your Airblown
®
Inflatable during the day
and at night. We recommend that you turn off your Airblown
®
Inflatable when leaving the immediate area and when retiring
for the evening. Otherwise, your Airblown
®
Inflatable is
designed to run continually as you see fit.
2. What happens if my Airblown
®
Inflatable becomes torn?
Rips in the Airblown
®
Inflatable can be sewn by hand (no special
thread is required) or taped with clear packing tape.
3. How can I clean my Airblown
®
Inflatable?
Wipe clean with a damp cloth and allow to dry before
storing away. Use mild detergent if necessary.
4. When I unplug my Airblown
®
Inflatable, it deflates. Why is
this?
Your Airblown
®
Inflatable will not stay inflated unless it is
plugged in and the fan is blowing air.
5. How much electricity does an Airblown
®
Inflatable consume?
It uses about as much energy as a standard string of holiday
lights.
6. What is the best way to store my Airblown
®
Inflatable?
Store in a bag, box or other storage container and keep in a
cool, dry location.
WARNING
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
CAUTION:
Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
illustration 4
