5
1. Do not remove the SD memory card while power is on. It causes recording file missing and device
malfunction.
2. Do not touch or hold SD memory card with wet hand or oily hand. It may cause malfunction due to SD
memory card damage.
3. Do not put a foreign substance into the SD memory card slot of a device. It may cause malfunction or SD
memory card insert problem.
4. When power is supplied by the cigar lighter, watch the poor connection in a socket. Poor connection
causes data loss and SD memory card damage.
5. Do not clean the device with water, benzene or alcohol. Wipe the device with soft and dry cloth.
Otherwise, it may cause device damage.
6. Do not shock a device. The shock to the device might cause damage or malfunction of the device.
7. If the device is required to re-install, adjust the camera angle again. Play the recording file and re-adjust
the angle if the camera captures viewing angle wrongly.
8. When a car accident happens, turn the power off and wait until indication LED light is off. Then, remove
the SD memory card from the slot. As the recording file can be over written, in case the recording file is not
saved in an Event Folder, the SD memory card has to be removed from the device and kept separately.
9. Use a recommended authentic SD memory card. Not using authentic SD memory card might cause data
loss.
10. Do not remove the SD memory card or turn the power off while SD memory data is deleted or
formatted.
11. Play the recording file regularly to see the video is correctly recorded. And format SD memory card
regularly to avoid SD memory card error.
12. While continuous recording, with the battery protection function, the device may stop working earlier as
per battery status influenced by personally installed accessories. Battery protection function is built-in to
avoid battery discharge. But careful watch is essential with continuous recording as the battery can be
discharged fast as per seasonal condition and battery using period.
13. Detecting GPS signal may take time from few seconds to few minutes as per weather and geography
condition.
14. In a very dark condition and under no light, the recorded video quality would lower than daytime
recording.
15. Dark tinting film on windshield causes bad video recording quality.
16. Metallic tinting on windshield may cause radio block. It causes GPS signal receipt problem.
17. G-shock sensor for event recording is built-in. But if the shock is weak, event recording file may not be
created.
18. Power failure from the vehicle due to big accident or shock might cause data loss.
19. Light reflection by GPS screen and indoor lighting might cause after image at night recording.
Caution
Summary of Contents for NCB-D200-IR
Page 1: ...1 User s Manual ...
Page 21: ...21 MEMO ...
