Gemini GVC14B, User Manual, Page: 6 / 24

6
DetacHaBLe fLoor BruSH
Floor Brush
LED Power Indicator
Motorized Brush
Press
Wall Mount Hole
Wall mounting:
• Choose a position close to an electrical wall socket.
• Before fitting it, make sure that there are no dangerous
objects hidden below the surface of the wall, such as
electrical wires, pipes, etc.
• Place the wall mount against the wall and mark the places
where the screws will go.
• Drill the holes and insert the anchors into the hole until
level the wall surface.
• Fit the screws into the anchors and remain 2 mm space
from the wall surface.
• Once the screws are fitted, place the wall mount onto
them and press it gently downward to make it secure.
• Insert the jack for the charger into socket on the wall
mount.
charging base:
Insert the upper part of the charging base to the lower part.
aSSeMBLinG tHe cHarGer BaSe
Screws
Anchors
Storage area for
screws and anchors
(Located on the back
of charger base)
DC
Jack
hole
Metal pin for
charging
foLDaBLe HanDLe
To lower the handle, press the folding
handle release button.
Lift the handle to an upright position,
the handle will lock automatically.