3. Install the water tank and plug in the power.
1. After connecting the power supply, the machine enters the preheat
-
ing mode, please wait for around 10 seconds, then press the steam
button, the steam will spray out. Release the steam button, the steam
function will stop.
2. During operation, the power indicator lamp will be on and off from
time to time, which is a normal phenomenon, and indicates that the
machine is holding the required temperature.
Startup and Ironing:
Notice:
Please disconnect the power supply after use to avoid scalding.
Notice:
In order to prolong the product life, it is recommended to use purified
water or distilled water, and close the sealing cover of the water tank
tightly.
Steam Button
Summary of Contents for GSS1000DB
