6
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
NSW-R4 WIRELESS BROADBAND ROUTER, 300M
3. Turn all the devices on.
4. Power the router up.
3 Quick Installation Guide
3.1 TCP/IP Settings
Before you can access and configure router, you have to setup your PC
network adapter IP address. Connect your PC to the router LAN port. Follow
the steps below to access the built-in router web-interface (for Windows OS).
Note
: The router default IP address is:
192.168.1.1
1. Choose Network connections from the Control Panel.
2. Click with the right mouse button over the Network adapter connected
to the router. Choose properties from the popup menu which would then
appear.
3. Select TCP/IP v.4 from the next window and click Properties
4. Select “Obtain an IP address automatically” and “Obtain DNS server
address automatically” in the IP Address tab.
5. Click OK to complete the install procedure. You might need to restart
your PC to activate these settings.
You can verify that your PC got correct IP address selecting Start
Run
cmd and then entering command: ipconfig /all.
