48
Parameters
Description
Enable WDS
Check this box to enable Wireless Distribution
System.
Add WDS AP into the list
Fill in the "MAC Address" and "Comment" of the
wireless station to be added and then click
"Apply Changes". Then this wireless AP will be
added into the "Current WDS AP List" below. If
you find any issues before adding it and want to
retype again. Just click "Reset" and both "MAC
Address" and "Comment" fields will be cleared.
Remove WDS AP from the list
If you want to remove some AP from the
"Current WDS AP List ", select the MAC
addresses you want to remove in the list and
then click "Delete Selected". If you want remove
all MAC addresses from the table, just click
"Delete All" button. Click "Reset" will clear your
current selections.
Click <
Apply>
at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
