MUSWL2 Wireless laser mouse
USER MANUAL
1
st
LED – “Connect” - will flash when you press the Connect button to link
the mouse with the receiver (see below). When the receiver changes the lD
successfully the indicator will flash fast several times.
2
nd
LED - “Charge” - will light up during charging the mouse battery. This
indicator will be turned off when the battery is full.
Linking the mouse with the receiver (changing the security ID)
Whenever you get undesired interference from another mouse
placed nearly you can change the security ID to solve this problem. You will
also need to perform this linking again whenever you replace the batteries.
To do that, please, follow the steps below:
1. Press the Connect button at the bottom of the mouse.
2. Press the Connect button on the receiver.
7
GEMBIRD EUROPE B.V. http://www.gembird.eu
