12
GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
CHM-02 COMPUTER HEALTH MONITOR PCI CARD
24
Initialize Slot 4
The configuration required before interrupt vector
initialization has been completed. Interrupt vector
initialization is about to begin
Set ES segment register to 4GB
25
Initialize Slot 5
Interrupt vector initialization is done. Clear the
password if the POST DIAG option is on
26
Test the protected mode, check
CPU and motherboard internal
memory. If any non-fatal errors
occurred then display error
messages, otherwise just boot
the operating system. This is the
final code
Read/write input/output port of 8042 keyboard;
ready for revolve mode, continue to get ready for
initialization of all data, check 8042 chips on
motherboard. See also AWARD BIOS
Enable A20 address line. Check
A20 pins of memory controlling
chips and the corresponding
circuit. See also AWARD BIOS
27
Initialize Slot 7
Any initialization required before setting the video
mode will be done next
28
Initialize Slot 8
Initialization before setting the video mode has
been completed. Set the monochrome and color
mode
Auto size DRAM
29
Initialize Slot 9
Initialize POST memory
manager
2A
Initialize Slot 10
Initialize the different bus system, static, and
output devices, if present
Clear 512KB base RAM
2B
Initialize Slot 11
Pass control to the video ROM to perform any
required configuration before the video ROM test
2C
Initialize Slot 12
All necessary processing before passing control
to the video ROM is done. Look for the video
ROM and pass control to it
RAM failure on address line
XXXX*
