Gemax Pro User Manual Download Page 4 | Manualshive

Page: 4 / 50

Gemax Pro User Manual Download Page 4

3

Welcome

Thank you for purchasing a Gemax Pro

Digital

Microscope.
Please take a moment to read through this manual. Its
contents will help you to get the best use of the smart
microscope.

1.

Precaution

Before using the LCD Digital Microscope, please ensure
that you read and understand the safety precautions
described below. Always ensure that the LCD Digital
Microscope is operated correctly.
Never operate LCD Digital Microscope where operation of
such devices is restricted. Improper use creates the risk
of serious accident.

Do not try to open the case of LCD Digital Microscope or
attempt to modify LCD Digital Microscope in any way.
Maintenance and repairs should be performed only by
authorized service providers.
Keep LCD Digital Microscope away from water and other
liquids. Do not use LCD Digital Microscope with wet
hands. Never use LCD Digital Microscope in the rain or
snow. Moisture creates the danger of fire and electric
shock.
If you notice smoke or a strange odor coming from LCD
Digital Microscope, turn the power off immediately.

«
...
2
3
4
5
6
...
»

Summary of Contents for Pro



















































Reviews:

No comments