Rev. 00 03/20
24
Operation
OptiSelect Pro GM04-CF
Setting the total air volume
1.
Adjust the total air volume on the gun control unit with the
T3/T4
keys
–
Adjust the total air volume according to the corresponding coating
requests
correct powder cloud
too little total air
Setting the powder output
1.
much powder
little powder
Adjust the powder output volume (e.g. according to the desired
coating thickness)
– Factory default setting of 50% is recommended for initial
operation. The total air volume is thereby kept constant
automatically by the control unit.
To achieve maximum efficiency, we recommend avoided an
overly high powder volume where possible!
2.
Check fluidization of the powder in the funnel cup
3.
Point the gun into the booth, switch the gun on and visually check
the powder output
Summary of Contents for OptiSelect Pro GM04-CF
