V 02/22
OptiGun GA03-E
Cleaning and maintenance
•
23
Cleaning and maintenance
General information
ATTENTION
All unauthorized modifications to the powder gun are forbidden for
safety reasons, and exempt the manufacturer from any liability
from resulting damage!
Regular, careful cleaning and maintenance extends the service
life of the gun and ensures long-lasting, uniform coating quality!
– The parts to be replaced during maintenance work are available
as spare parts. These parts can be found in the corresponding
spare parts list!
Cleaning
Gun cleaning
ATTENTION
The following solvents may not be used to clean the gun:
► Ethylene chloride, acetone, ethyl acetate, methyl ethyl ketone,
methylene chloride, premium gasoline, turpentine, tetrachloro-
methane, toluene, trichloroethylene, xylene!
1.
Only cleaning agents with a flash point of a least 5 Kelvin above
the ambient temperature, or cleaning places with technical venti-
lation are allowed!
Before cleaning the powder gun, switch off the control unit. The
compressed air used for cleaning must be free of oil and water!
Daily
1.
Blow off the outside of the gun and wipe, clean etc.
Weekly
2.
Remove powder hose
Summary of Contents for OptiGun GA03-E
Page 24: ......
Page 29: ...V 02 22 OptiGun GA03 E Cleaning and maintenance 27 7 8 9 10 ...
Page 30: ...V 02 22 28 Cleaning and maintenance OptiGun GA03 E 11 12 13 14 ...
Page 32: ......
