V
03/17
OptiFlex A2 (AS08)
Start-up
•
15
Start-up
General information
These general information serves to obtain an overview of the possible
OptiFlex A2 system combinations.
Detailed information will be found in the corresponding operating
manuals!
Power supply
–
The power supply is dependent on the type and the number of
control units:
–
Stand alone
– 1x100-230 V / 50/60 Hz
–
Full extension
– 3x400 V+N+PE / 50/60 Hz
–
The input power value is plant-specific and evident in the provided
wiring diagram
–
All electrical components are implemented in accordance to IP54
protection type regulations
ATTENTION
The OptiFlex A2 control system may can be switched on only if the
booth is in operation!
►
If the booth switches off, the control system must also switch off!