Rev. 00 03/22
OptiFeed BigBag (FPS16)
Product description
•
23
Pos.
Function
Description
Conveying off
When switching to the
0
position, the powder conveying procedure
will be interrupted , and the large powder container lowers
immediately.
Cleaning
By pressing the
Cleaning
key, the rinsing procedure of the powder
pump will be started.
– The suction unit must be lifted manually and can then be
blown off and cleaned with compressed air
(Attention -
large dust formation possible!)
5
Conveying ready
This indicator light indicates that the system is ready for conveying
Control module
Fig. 6: Control module
1
Power pack
2
Main module
3
Additional module
Powder pump
The laterally attached powder pump sucks the powder, if required, by the
fluidizing/suction unit and ensures the transport to the powder container in
the coating plant.
All information about the powder pump can be found in the corresponding
enclosed documentation!
Summary of Contents for FPS16
