GEM R563, Operating Instructions Manual

Page: 6 / 53

www.gemu-group.com 6 / 53 GEMÜ R563
4 GEMÜ CONEXO
3.2 LED displays
3.2.1 Status LEDs
LED Colour Function
Standard Inversed 1)
Power/fault
green green Operating
indication/
communication
status
red red
Open
orange green Process valve in
OPEN position
Error
red red Error
Closed
green orange Process valve in
CLOSED position
1) Inversed representation of the OPEN and CLOSED LEDs, ad-
justable via IO-Link
3.2.2 LED conditions
Status
process
valve
Power/
fault
Open Error Closed
OPEN po-
sition
CLOSED
position
Position
unknown
Initializa-
tion
Open and Closed flash
alternately
LED conditions
lit (on) flashes off
3.3 Description
The GEMÜ R563 2/2-way straight seat control valve has a
body with an integrated control mechanism. The GEMÜ R563
valve was specially developed for controlling small quantities
and allows flow rates from 63 l/h to 3300 l/h. The valve will
be available with a positioner for a 0/4-20 mA or 0-10 V input
signal and can also be configured to a fail-safe position by
using an emergency power supply module. Additional func-
tions can be adapted via the IO-Link interface. The self-lock-
ing actuator holds its position in a stable manner when idle
and in the event of power supply failure.
3.4 Function
The product controls or regulates (depending on version) a
flowing medium by being closed or opened by a motorized
actuator.
The product is equipped as standard with a mechanical posi-
tion indicator as well as an electrical position and status in-
dicator.
4 GEMÜ CONEXO
Order with CONEXO
GEMÜ CONEXO must be ordered separately with the ordering
option "CONEXO" (see order data).
For electronic identification purposes, each replaceable com-
ponent contained in the product is equipped with an RFID
chip (1). Where you can find the RFID chip differs from
product to product.
1
Actuator RFID chip
The CONEXO pen helps read out information stored in these
RFID chips. The CONEXO app or CONEXO portal is required to
view this information.
5 Correct use
DANGER
Danger of explosion
▶ Risk of death or severe injury.
●
Do
not
use the product in potentially
explosive zones.
WARNING
Improper use of the product
▶
Risk of severe injury or death.
▶ Manufacturer liability and guarantee will be void.
●
Only use the product in accordance with the operating
conditions specified in the contract documentation and
in this document.
The product is designed for installation in piping systems
and for controlling a working medium.
The product is not intended for use in potentially explosive
areas.
● Use the product in accordance with the technical data.