GEM DG-2000 Series, Operation Manual

Page: 3 / 17

GEM
DG-2000 Series Standalone PROX Reader Controller Operation Manual
__________________________________________________________________________
_______________________________________________________________________________________________________________
Version 1. 05-22-2015
Gianni Industries, Inc. Page 3 of 17
2. TECHNICAL SPECIFICATIONS:
Keypad Operations
1. System will monitor keypad entry, it will not accept invalid entry
2. Each code entry waiting time is 10 seconds. If time expires, the program will exit with beep sound 5
times.
LED Indicators
Main Reader Controllers Optional Readers
Ready mode
Program
mode
Prompt to
enter
password
Flashing
Yellow
Flashing
Yellow
During
electrified lock
release
Invalid Card
Buzzer Indications
n o i t p i r c s e D s d n u o S p e e B
1 Code entry ; Access is granted
2 Return to programming mode
3
Access denied ; Invalid password ; Invalid value entry
4 Power on, Reset to factory setting
Door Ajar Get a single beep for every 2 seconds until door sensor closed
Sound Duration
Beep Volume n o i t p i r c s e D
Short 10ms
Medium 20ms
Long
40ms
DG-2100K
Red
Flashing
Yellow
Green
Flashing
Green
DG-2000US DG-2100EU DG-2000R DG-2000K DG-2000SR DG-2100R
Power Voltage 12 to 16 VAC/DC
Operating Current Less than 80mA DC for controller, 1.5A DC for Electrified locks
Operating Temperature
Operating Humidity 0 to 95% non-condensing
RFID Technology
EM: 125 KHz
Mifare: 13.56 MHz
Read Range
40mm+ for 13.56 MHz ISO card
80mm+ for 125 KHz ISO card
Response Time
Alarm Output
Relay Specifications 12VDC, 2A DC
Dimensions DG-2100EU 86 x 86 x 21mm, DG-2000US 105 x 80 x 21 mm
Weatherproof Yes
Color
-10°C to +65°C
EM + Mifare
Less than 0.2 seconds
5VDC with 25mA DC
Black
Red Red Blue Blue Blue Red
Yellow Yellow
Green Green Green Green Green Green
Red Red Red Red Red
DG-2000SK
Flashing
Green
Blue
Green
Red