INSTALLATION INSTRUCTIONS
Warning:
• This lamp MUST be installed by a qualified electrical contractor ONLY
• Warning: Before obtaining access to terminals, all supply circuits must
be disconnected
• This appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely. Young children
should be supervised to ensure that they do not play with the appliance.
• The bulb, lamp holder or shade may get hot when the lamp is operating,
do not touch them to avoid a hazard.
• To prevent damage to the appliance do not use alkaline cleaning agents
when cleaning. Use a soft cloth and a mild detergent. Always switch off
before cleaning.
• Failure to maintain the lamp in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED
CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Installation Procedures:
1. Dismantle the front cover and back fitting, put back fitting against the
mounting surface
2. Drive in 2 screws to fasten back fitting and connect to power
3. Fasten 2 screws for 2 magnetic parts
4. Install the lamp.
5: Put the lamp shade on.
2
1
3
4
www.gelia.no
Utendørslampe
Materialer: Aluminium og glass
Designet for utendørsbruk - IP44
Maks. 2 x 35 W GU10 (ekskl. lyskilde)
Monteringsanvisninger:
Vanlige forsiktighetsregler gjelder.
Alle komponenter i lampen må installeres på riktig måte.
Lampen må installeres av auktorisert elektriker.
Bytte av lyskilde:
1. Slå av hovedstrømbryteren
2. Ta av det øvre eller nedre glasset på lampen (se illustrasjon)
3. Skru i den nye lyskilden (bruk kun de anbefalte typene)
4. Sett på igjen glasset
5. Slå på strømmen
220-240 V
~
50 Hz
Inneholder: Komplett lampe (ekskl. lyskilde)
IP44 - for utendørsbruk
