6
2. Software activation at myGEKKO
Log in as configurator.
Change to system menu -> Heating / Cooling -> Select the corresponding room
1.
and go to the IO configuration.
Under ‘room controller’ select the room temperature sensor ‘Thermasgard 4277’
2.
Tap ‘Sensors’ to specify the interface and address.
3.
Under ‘Control panel’ save the interface (RIO-29 module) to which the room controller
4.
is connected.
Save the bus address of the controller under ‘Address’.
5.
Done! After entering the interface and address the temperature will be displayed un-
6.
der temperature. Thus, the controller is working properly.
Select controller
Interface and address assignment
