GEKCO DIGITAL CLOCK P/N CLK100 ASSEMBLY & OPERATION MANUAL
22
REV 1.1
GEKCO INC.
10.4.
Setting the Alarm Time
The alarm time can be set. The is done by pressing the SET button until the “Set AL” display is shown.
Then press the + (increment) button to set the alarm hours. Press the + or – button to increment or
decrement the alarm hours. Press the SET button to select the alarm minutes setting. Press the + or –
button to increment or decrement the alarm minutes. Press the SET button to exit this setting.
10.5.
Setting the Alarm On or Off
The alarm function can be set on or off. The is done by pressing the SET button until the “AL OFF”
display option is shown. Then press the + (increment) button to toggle the alarm either On or Off. Press
the SET button to exit to the next menu option.
10.6.
Setting the Local Time to 12 or 24 hour
The local time display can be set 12 or 24 hour mode. The is done by pressing the SET button until the
“12H on” display option is shown. Then press the + (increment) button to toggle the 12 hour mode
either On or Off. Press the SET button to exit to the next menu option.
10.7.
Setting the Display Brightness
The display brightness can be set from a minimum to maximum brightness level of 0 to 15. The is done
by pressing the SET button until the “diSP 8” display option is shown. Then press the + or – button to
increase or decrease the display brightness. Press the SET button to exit and return to the normal
clock display.
