GEITH QC100 H1, Manual

Page: 35 / 58

www.geith.com 3-15
OPERATION
Releasing The Attachment From Mechanical Quick
Coupler
AVOID SERIOUS INJURY OR DEATH
•
Keep bystanders away when engaging and
releasing attachment.
•
Keep attachment close to ground during
engaging or releasing attachment. Attachment
can fall off without warning if not fully engaged
and locked causing death or serious injury.
Park the machine on flat, level surface.
Figure 31
Lower quick coupler and attachment until slightly off the
ground
[Figure 31]
.
Figure 32
Install the drive bar (1)
[Figure 32]
onto the cylinder drive
shaft at back of engaging plate. Turn the drive bar anti-
clockwise to release the back pin lock.
Continued loosening to open the quick coupler (2)
[Figure 32]
.
Remove drive bar from the quick coupler.
Figure 33
Lower quick coupler and attachment to the ground
[Figure 33]
.
Figure 34
Release it from the quick coupler by rolling the quick
coupler away from attachment pins
[Figure 34]
.
WARNING
2
1