Chapter 3 - Setup
65
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
Figure 3-37 Email Configuration Page
Target email addresses can be configured as follows:
Figure 3-38 Email Target Address Page
Legend of icons/buttons:
1. Add new target email address.
2. Modify existing target email address.
3. Delete existing target email address.
4. Send test email.
To send emails, the unit must be configured to access the mail server, as follows:
·
SMTP Server:
The name or IP address of a suitable SMTP or ESMTP server.
·
Port:
The TCP port which the SMTP Server uses to provide mail services. Typical
values would be port 25 for an unencrypted connection, or 465 and 587 for a TLS/SSL-
encrypted connection, but these may vary depending on the mail server's configuration.
·
Enable SSL:
If Enabled, the unit will attempt to connect to the server using a fully-
encrypted TLS/SSL connection. When this setting is enabled only fully-encrypted
