GEIGER TCU 150 Operation Manual Download Page 3

I. INTRODUCTION

If you need assistance related to this product, please call Delasco at 
800.831.6273 (712.323.3269).

It is important that the instructions supplied with this equipment be read, 
understood, and followed in order to enhance safety and effectiveness.

II. TABLE OF CONTENTS

PRECAUTIONS ........................................................................................ 1
INDICATIONS FOR USE .......................................................................... 2
INSPECTION ............................................................................................ 2
DEVICE DESCRIPTIONS ........................................................................ 2
OPERATING INSTRUCTIONS ................................................................. 4
UNIT CLEANING ...................................................................................... 5
STORAGE ................................................................................................ 5
STERILIZATION OF ACCESSORIES ...................................................... 5
WARRANTY AND REPAIR ....................................................................... 6
SPECIFICATIONS .................................................................................... 6
SYMBOL EXPLANATION ......................................................................... 7
VOLTAGE/CURRENT VS. DIAL SETTING ............................................... 8

III. PRECAUTIONS

CAUTION:

 Federal (U.S.A.) law requires the sale of this device to or on 

the order of a physician or health care professional.

CAUTION:

 This device is supplied non-sterile.

WARNING: 

The risk of igniting flammable gases or other materials is 

inherent in the practice of thermal cautery and cannot be eliminated by 

device design. Precautions must be taken to avoid contact of flammable 

materials and substances with thermal cautery electrodes, whether they 
are in the form of an anesthetic or skin preparation agent, are produced 
by natural processes within body cavities, or originate in surgical drapes, 
tracheal tubes or other materials.

CAUTION: 

Studies have shown that smoke generated during thermal 

cautery procedures may be harmful to surgical personnel. These studies 
recommend using a surgical mask and adequate ventilation of the smoke 
using a smoke evacuator or other means.

1

Summary of Contents for TCU 150













Reviews: