GEIGER M56K144, Adjusting Instructions, Page: 2 / 2

2
DE
EN
FR
Setting switch …
...for Venetian blind motors (GJ56..e) and the motors MODULARline Easy (GR45..E01), SOLIDline
Easy (GU45..E01), SoftPlus/SoftZero/SoftPlus-DG (GU45..E02), SoftReverse (GU45..E06) and
SoftLock (GU45..E07).
Connection of the setting switch
To realise the required setting procedures, the setting switch M56K144/M56F150/M56F151 must
be used. If necessary do use the adaptation cable with the service terminals M56B265.
H
The work with the service terminals may be accomplished only by an
electrical specialist.
Connection with setting switch M56K144/M56F150 (when required with adaptation cable M56B265)
Programming key
Mains
230 V~
LED Hirschmann coupling
(M56K144/M56F150)
1/DOWN
2/UP Setting switch
M56K144/M56F150 Service
terminals
Connecting
cabel to limit stop
Adaption cable
M56B265
Connection with setting switch M56F151 with service terminals
Programming key
Mains
230 V~
LED
1/DOWN
2/UP Setting switch
M56F151 Service
terminals
Connecting
cabel to limit stop
H
SECURITY NOTE: This setting cable is protected against damage with a fuse type
T 1,6 A 250V. This fuse must be replaced by a fuse of the same type. Other types of
fuse might damage the setting cable.
Please disconnect the device before opening the housing. The device may only be
opened by a qualified electrician.
GEIGER motors GJ56..e, MODULARline and SOLIDline
I
Note: please refer to the installation and operating instructions of the respective
motors to adjust the end positions and to modify the power levels.
Subject to technical modifications | 100W0510 en 0818
For technical questions, please call our service team at: +49 (0) 7142 938-333.
They will be happy to assist you.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6
D-74321 Bietigheim-Bissingen
Telephone: +49 (0) 7142 938-0
Telefax: +49 (0) 7142 938-230
E-Mail: info@geiger.de
Internet: www.geiger.de