GEIGER GF0043, Manual, Page: 20 / 32

20 of 32
Time and date can be entered in the timer menu. Use the
horizontal navigation keys to move the blinking cursor for input
either to the left or to the right.
Cursor to the left Cursor to the right
If the cursor flashes by the 4 time digits, the values for the
switching times can be set up using the navigation keys
(UP/DOWN). The desired time – when the timer should control
the receiver – is now set.
Higher value
Lower value
If, after the last time digit, you move the cursor further right, the
receiver symbol flashes. By pressing the Ok key you can
set up in the next selection window, which coding should be
sent by the timer. This selection appears only if a receiver has
been created with 2 running directions.
The desired running direction is selected by using the
navigation keys (UP/DOWN) and confirmed with the OK key
This determines here e.g. if the timer extends or retracts the
awning at the programmed time.
You access the timer menu by using the multifunction key
Important: the settings are not accepted.
By using the navigation keys „UP/DOWN“ and „RIGHT/LEFT“ you
access in the timer menu the selection of the days of the week.
Place the blinking cursor on the desired day and select with the
OK key. If a week day is marked, the corresponding check box
turns black. A selection can be cancelled at any time by clicking
the OK key again.
If the astro function has been activated previously in the settings
menu, the multifunction key appears in the timer menu.
The astro function for the timer entry can be enabled/disabled with the key . .
Icon shows when the astro function is activated, icon shows if the astro function is
disabled.
.
All settings are saved by using the multifunction key and you return to the timer menu.
Press multifunction key to return to the timer menu.
Important: the settings will not be accepted.