Gehl R190, Operator'S Manual

Page: 45 / 130

50950106/AP0313 41
T-Bar Controls
The loader may be equipped with
T-bar controls (Figure 16). The
left T-bar controls the drive, and
the right T-bar controls the lift/
tilt.
Drive Controls
Forward, reverse, speed and
turning maneuvers are accom-
plished by movement of the left
T-bar. To go forward , push the
control forward; for reverse , pull
the control rearward. To turn
right , turn the control clockwise;
to turn left , turn the control coun-
terclockwise. For gradual turns,
move the T-bar slightly forward
or rearward. For sharp turns, turn
the control clockwise or counter-
clockwise.
Moving the T-bar farther from neutral increase the speed steadily to the max-
imum travel speed. Tractive effort decreases as speed increases. To get maximum
tractive effort, move the T-bar only slightly away from the neutral position. The
engine will stall if the control is moved too far forward when loading the bucket.
Be sure the controls are in neutral before
starting the engine. Operate the controls
gradually and smoothly. Excessive speed and quick control move-
ments without regard for conditions and circumstances are haz-
ardous and could cause an accident.
Figure 16 T-Bar Controls
1. Lift/Tilt Control
2. Drive Control
1
2
WARNING