Gehl R190, Operator'S Manual

Page: 32 / 130

28 50950106/AP0313
Indicator and Warning Lamp Display
1. Battery – Lights if the charging voltage is too high or too low. During normal
operation this indicator should be OFF.
2. Engine Air Filter – Lights when a restriction in the engine air filter is
detected, warning the operator to clean or replace the element in the engine
air cleaner. During normal operation this indicator should be OFF.
3. Hydraulic Oil Temperature – Lights if the hydraulic oil is too hot, warning
the operator to reduce the hydraulic load and determine the cause of the high
temperature. During normal operation this indicator should be OFF.
4. Engine Oil Pressure Warning – Lights if the engine oil pressure is too low,
warning the operator to immediately stop the engine and determine the cause
for the low pressure. During normal operation this indicator should be OFF.
5. Engine Coolant Temperature – Lights if the engine coolant is too hot, warn-
ing the operator to stop the engine and determine and correct the cause of the
high temperature. During normal operation this indicator should be OFF.
6. High-Speed – Lights when two-speed (optional) is engaged.
7. Hydraglide™ Ride Control System – Lights when the ride control system
is activated.
8. Float Indicator – Lights when the lift arm “float” function is activated.
9. Pre-heat Indicator – Lights when the (automatic) pre-heat is active. During
normal operation this indicator should be OFF.
10. Fasten Seatbelt – A momentary visual (and audible) indicator to remind the
operator to fasten the seatbelt(s).
11. Engine Malfunction Shutdown Indicator – Lights when the engine elec-
tronic control unit (E-ECU) has detected a failure warranting an automatic
shutdown. Review the electronic display for error code details. See Engine
Diagnostics chart on page 81.