GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Instruction Manual

Page: 143 / 387

Index
MENU MENU
MENU MENU
MENU
[Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 143
C05.13 AI 1X offset [%] RWS 0 -100/100 PP V-F-S-B Full 5061
Analog Input 1X offset count value 100% is equal to 10V or 20mA.
C05.14 AI 1X low lim [cnt] RWS -16384 -32768/32767 PP V-F-S-B Full 5065
Lower limit of the Analog Input 1X block output in count (see figure of Analog Input 1
description above)
C05.15 AI 1X hi lim [cnt] RWS 16383 -32768/32767 PP V-F-S-B Full 5066
Upper limit of the Analog Input 1X block output in count (see figure of Analog Input 1X ).
C05.16 AI 1X offs tune / Start?
Autotune command for the Analog Input 1X offset. Input automatic fine-tuning.
To run the autotune, put the input signal to its minimum value and execute “
Start ?
”
command.
C05.17 AI 1X gain tune / Start?
Autotune command for the Analog Input 1X gain. Conditions containing an offset can be
compensated. To run the autotune, put the input signal to its maximum value and execute
“
Start ?
” command
C05.20 AI 1X output [cnt] R 0.00 -32768/32767 PV V-F-S-B Full 5067
Analog Input 1X output count displaying
C05.21 AI 1X < thr N/A R 0 0/1 DV V-F-S-B Full 5068
Display of threshold compensator state of Analog Input 1X (1 = the condition is true)
C05.23 AI 1X gain N/A RWS 1 -16/16 PP V-F-S-B Full 5064
Analog Input 1X gain count value displaying
C06 INTERFACE / An Inp 2X
See Analog Input 1X diagram and description details above.
C06.00 AI 2X sgn src N/A RWS Ipa4000 PList 3 PIN V-F-S-B Full 5089
Ipa 4000 - NULL = Default
It connects the selected signal to the selector of the multiplier input: if the signal is 0,
multiply by +1, or if the signal is 1, multiply by -1. The multiplier allows to invert Analog
Input 2X signal.
ª ª ª ª ª
Pick List 3