Gefen VGA-2-DVISN, User Manual, Page: 7 / 12

CONNECTING AND OPERATING THE VGA TO DVI SCALER
How to Connect the VGA to DVI Scaler
1- Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler will not
work without a source plugged in)
2- Connect the DVI (m-m) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler.
3- Connect the power supply.
*Note: The default resolution is set to NATIVE mode.
Operating the VGA to DVI Scaler
Button Function
MENU Shows and Hides the On Screen Menu /
Menu and Item Selection
+ Moves menu cursor DOWN the menu /
Increases adjustment values
- Moves menu cursor UP the menu /
Decreases adjustment values
Hold MENU and unplug and replug the
power source. After you have done that,
you can release the MENU
Resets scaler back to NATIVE resolution
of the display
Auto Adjust
Press the
-
button
Tunes picture to displays optimum
settings
4
Output resolutions that are supported:
VGA 480I 576I WXGA
SGA 480P 576P WSXGA
XGA 720P/60 720P/50 WVXGA
SXGA 1080I/60 1080I/50 NATIVE
UXGA 1080P/60 1080P/50