Connecting and Operating the VGA to DVI Adapter
How to Connect the VGA to DVI Adapter
1) Connect the supplied VGA cable to the computer VGA port and the VGA to DVI
Adapter.
2) Connect the power supply to the VGA to DVI Adapter.
3) Connect the DVI monitor to the VGA to DVI Adapter.
4) Start up the computer.
5) Observe that the power light is ON. The screen will show 640x480
fi
rst, then go to the
proper setting.
6) You should see a beautiful picture.
7) If you need to adjust the picture position or phase, there are adjustments on top of
the box to move up, down, left, right, and the clock phase.
4
Troubleshooting the VGA to DVI Adapter
If there is no picture after a restart:
1) Verify that all the cables are tightly secured and the power LED is on.
2) Recycle the power on the VGA to DVI Adapter.
3) Restart the computer.
4) Make sure that your computer is running at 60hz.
5) Make sure that the native resolution of your monitor is not higher than
1280x1024x60hz.
