manualshive.com logo in svg

Gefen ULTRA HD EXT-HDBOOST-141, User Manual

Share
Download
Gefen ULTRA HD EXT-HDBOOST-141 User Manual Download Page 58

page | 48

Appendix

Firmware Upgrade Procedure

The following items are required to update firmware:

• 

Booster for HDMI with EDID Detective

• 

Computer running Windows XP

• 

Terminal-emulation program (e.g. HyperTerminal)

• 

USB to Mini-USB cable

• 

Firmware file

1. 

Download the firmware file from the Gefen Web site.

2. 

Extract the contents of the 

.zip

 file to the Windows® Desktop.  The 

.zip

 file will

 

contain the file:  

HdmiEdidP_[version].bin

.

3. 

Connect the USB cable between the computer and the Mini-USB port on the booster.

4. 

Launch Hyperterminal and select the Virtual COM Port.  For more information see

 

Using the Virtual COM Port

.

5.  Type the command:  

#fw_upgrade

.

6.  The following will be displayed on the terminal screen: 

 

#fw_upgrade 

CCC 

 

The “C” character will continue to be echoed to the terminal until the file transfer

 

is initiated.

7.  In Hyperterminal, click 

Transfer

 > 

Send File...

8. 

Select

 the 

HdmiEdidP_[version].bin

 file

.

9. 

Select 

YModem

 from the Protocol drop-down list and click the 

OK

 button. 

 

The firmware update procedure will begin.  This process should take about 15

 

seconds.  After the firmware update is successful, the following will be displayed in

 

the terminal program: 

 

HdmiEdidP_[version].bin 

Download successfully 

Summary of Contents for ULTRA HD EXT-HDBOOST-141





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands