page | 19
Appendix
Surface-Mounting Instructions
The Gefen
DisplayPort KVM Extender over CAT-7
can be mounted on any horizontal or
vertical flat surface (e.g. wall or inside / outside a cabinet with wood / drywall screws)
as shown in the diagram above. There should be an inch or two of clearance between
the edges of the unit and any walls or vertical surfaces to allow for enough clearance for
connection and disconnection of the DisplayPort cable.
For installation on a drywall surface, use a #6 drywall screw. When installing, it is
recommended to use the center hole on a stud.
