7
RMT-8HDS-IR INSTALLATION
Remove battery cover from the back of the RMT-8HDS-IR remote.
Verify that dip switches 1 & 2 are in the down (OFF) position.
Insert the battery, hold the battery so that you can see the positive side facing up.
The side that is not marked must be facing down.
Test the RMT-8HDS-IR remote by pressing ONLY one button at a time. The
indicator light on the remote will fl ash once each time you press a button.
WARNING: Do not press multiple buttons simultaneously and do NOT press
buttons rapidly. These actions will cause the remote to reset and steps 1-4 will have
to be repeated.
Note: The RMT-8HDS-IR ships with two batteries. One battery is required for
operation, the second battery is complimentary.
The following are the dip switch combinations that correspond to the Remote Code
menu option on the HD-SDI to DVI Scaler (Please see Menu Functions section for
more information):
1
2
Remote Channel 0:
1
2
Remote Channel 1:
1
2
Remote Channel 2:
1
2
Remote Channel 3:
1.
2.
3.
4.